


HOUSES: SEACOAST – I / SEACOAST – II / SEACOAST – III
AMERICAN HOME CONSTRUCTION
1 .- FOUNDATIONS
Reinforced concrete foundations 40 x 60 cm. chain of faith. 15 x 30 cm. Polyethylene moisture barrier.
2 .- OVERLOAD
The plinth is executed with concrete blocks run pre-vibrated 19 x 20 x 39 cm.
3 .- RADIERS
It provides a range monolithic 8-10 cm. ACMA mesh thickness, moisture barrier, all anchored by a continuous reinforcement mat foundation and plinth.
4 .- STRUCTURE OF SEPTA
All the structures of external and internal walls will be in impregnated pine 2 x 4. ” These structures will consist of: sill plate, studs, dogs, structural and double diagonals Upper Sill.
5 .- Structure of Roofing
The roof trusses were structured with raw pine 1 x 4 “, 1 x 5″ or 1 x 6 “depending on the project, structural and diagonal braces as appropriate.
6 .- INSULATORS
In external walls, interior and ceiling referred wool fiberglass mat free from 80 to 89mm thick.
7 .- EXTERIOR SIDING
The perimeter structure will be sided with OSB chipboard plate of 9.5 mm, was installed on the felt 15 pounds to get deployed and steel mesh 25 to 30mm layer of stucco as exterior wall finish.
8 .- INTERIOR COATING
Get inside the walls plasterboard 15mm carton (waterproof in wet areas) bolted to stand up straight. The skies will be covered in sheets of 10mm plasterboard, screwed to omega profiles.
9 .- LINER COVER roofing / TAPACANES and ALER
The trusses will slabs of 2×2 “pine, on guides daffodils were installed 1×1″ for mooring and installation of clay tile Chilean type.
The eaves are considered dogs to the national view Oregon pine 2×6 “and engaged with sky chart ¾ x 5″ at national and Oregon pine is considered TAPAC 1 x 4 “Oregon pine country.
10 .- TERMINATION INTERIOR WALL AND CEILING
Paintings: The interior walls and ceilings will be completed to receive the proper term to be agreed. Plaster base is contemplated in all joints with joint tape and applications Gard paste required to completely finish. Features on the corners of windows, corridors, etc. corners were installed with galvanized iron, properly bolted to the structure, which will receive plaster, ribbon and paste together as described above. The paint is applied in 2 to 3 coats of latex enamel on the ceilings and walls of water, Sipa or similar quality.
Ceramics and Porcelain Tiles: ceramic or porcelain tiles are installed at customer’s choice with a maximum purchase price of $ 7,000 .- per m2 including VAT.
11 .- TERMINATION INTERIOR FLOORS
Was installed as a floor covering customer choice, ceramics or porcelain for a maximum purchase value of $ 7,000 .- per m2 vat / inc, high melamine floating floor traffic for a maximum purchase value of $ 14,000 .- per m2 VAT / inc. or type boucle rug purchase worth up to $ 9,000 .- per m2 VAT / inc.
12 .- DOORS AND WINDOWS
Interior doors are considered Trancura CORZO Oregon Pine Rustica or similar. Door leaf height = 2.00 m, width according to plans.
The front door is solid wood pine national proclamation from arch.
The windows will be aluminum bronze Simple Profile or similar monolithic crystals, colorless, openings and sizes according to architectural plans.
13 .- DUST and pilasters
These are national varnished Oregon pine. Dust and 1×4 and 1×3 pilasters. ”
14 .- HARDWARE
Tubular locks were installed bronze or brushed steel finish knob. The locks are security clearance, the bathroom or bedroom as appropriate. The value per unit of plate will be $ 12.000 .- VAT / inc.
For front door security lock is considered a value per unit of $ 30,000 .- VAT / inc.
15 .- TAPS
Be installed in all bath fixtures and kitchen sink mixer taps as shown by an average of $ 30,000 .- per unit, taxes / inc. Considered as simple taps on the wall for washing and laundry in laundry.
16 .- DEVICES
Wc will be installed in bathrooms white complete with pond, trim and hardware valued at $ 90,000 .- VAT / inc. Each.
The enameled steel tubs are standard white 70cm wide (long as architectural plans).
To vanitório containers below deck are considered a unit value of $ 25,000 .- VAT / inc. and receptacles on the deck with a value per unit of $ 45,000 .- VAT / inc. Everything according to architectural plans.
The kitchen includes built-in dishwasher 44x120cm, with two receptacles and a stylish, stainless steel. Not considered utility appliance or furniture.
17 .- FURNITURE KITCHEN AND CLOSET
The kitchen cabinets, and closets will vanitório as architectural plans. Kitchen furniture is covered with indoor indoor posformada 15mm white melamine and lacquered doors in melamine or posformadas. Furniture bases are covered and pendants.
In master baths referred vanitório coated or carrara marble travertine structure in 15mm white melamine and lacquered doors, melanin or posformadas. Bath vanitorio service not considered.
The closet will be according to architectural drawings or color in white melamine 15mm with drawers, shelves and hanging bars molded MDF doors or painted white.
18 .- WIRING
Project will be according to specialty.
It provides a high quality network conduit and boxes according to electrical code, two plugs per precinct, two sausages per precinct bulbs, switches (depending on the project), 2 centers, cable TV, two telephone centers, panel and ground. All appliances are brand Matix BTicino or similar model.
19 .- WATER PLANTS
Project will be according to specialty.
All network installation of hot and cold potable water will be held in American Flair-IT system, centralized water distribution in PEX.
20 .- SEWAGE FACILITIES
Project will be according to specialty.
All PVC pipe will be in health. Vents were left, records and cameras needed for the proper functioning of the system.
May be included as an annex, construction of septic tank if so required.
21 .- GAS INSTALLATIONS
Project will be according to specialty.
Is provided a network of liquefied gas in copper, all installed to connect to public network or individual ponds.
Ionized califont be installed or Junkers Splendid brand.
Roberto Bottinelli W – Seacoast Construction Ltd.
Ricardo Videla Lapi – Architect